| Produkt | Datei | MByte |
|---|---|---|
| QF Manual English | 1.6 | |
| QF Manual Deutsch | 1.6 | |
| QF Manual Français | 1.6 | |
| QF Manual Italiano | 1.6 | |
| QF Manual Espagñol | 1.6 | |
| QF Manual Česky | 1.6 |
| Produkt | Beschreibung | Datei | MByte |
|---|---|---|---|
| D-EPDB/EPDR | Epoch HD Coated Deep End Mill | 0.8 | |
| CBN-EPSB/EPSR | Epoch Cubic Boron Nitride End Mill | 0.8 | |
| EPPP-TH | Epoch TH Power Mill Precision | 0.8 | |
| EMB | Epoch Mega Feed Ball | 0.8 | |
| MIRUS | Epoch ATH Mirus Series | 0.8 | |
| ETMP | Epoch Turbo Mill Pencil Neck | 0.4 | |
| ETRP | Epoch Turbo Rib Pencil Neck | 1.3 | |
| HGOF | GO-Line High Feed | 0.4 | |
| EPSB | Epoch Super Hard Ball | 0.6 | |
| EPDBP/EPDRP | Epoch Deep Ball/-Radius Pencil Neck | 0.6 | |
| EPDB/EPDS | Epoch Deep Ball/-Square | 0.6 | |
| EPDR | Epoch Deep Radius | 0.6 | |
| EPDRF | Epoch Deep Radius F, TH-Coating | 0.6 | |
| ETM | Epoch Turbo High feed Radius | 0.5 | |
| EPBT/EPHT | Epoch Hard/Ball TH Coating | 0.5 | |
| EPP-TH | Epoch TH Power Mill | 0.5 | |
| EPP | Epoch Power Mill | 1.0 | |
| EPPLN | Epoch Power Mill Long Neck Corner Radius | 0.7 | |
| Miniature | Micro Grain Carbide End Mills | 1.2 | |
| Long Carbide Ball | Carbide End Mills | 1.0 | |
| EFB | Epoch Finish Ball | 0.3 |
| Produkt | Beschreibung | Datei | MByte |
|---|---|---|---|
| BCF/-M | Roughing Ball | 1.4 | |
| ASM/AHU Mini | Side Milling & High Feed Ultra End Mill | 1.0 | |
| ASRF-/M | Super Radius Mill Four Corners | 1.0 | |
| ABPF-/M ARPF/-M | Ball / Radius High Precision Finish + Modular | 1.0 | |
| ZDFG | W Type Inserts for ABPF | 0.3 | |
| AHU/AHUM/AHUB | High Feed Ultra End Mill/-Modular/-Bore Type | 1.4 | |
| AHR Mini | Advanced Heavy Roughing | 1.2 | |
| AHUM15/AHUB15 | High Feed Ultra End Mill/-Modular/-Bore Type | 1.4 | |
| ASPV/-M | Polish Mill Vertical Type/-Modular/-Bore Type | 1.6 | |
| ASR/-M | Turbo Metric Series/Modular/Bore Type | 0.8 | |
| ASR/-M Pico | Turbo Metric Series | 197 kB | |
| ASF | Turbo Face | 1.4 |
| Produkt | Beschreibung | Datei | MByte |
|---|---|---|---|
| WHNSB | Carbide Oil Hole Non Step Borer | 0.7 | |
| WHNSB2 | Carbide Oil Hole Non Step Borer, additional sizes | 1.1 |
